|
COMbricks Oscilloscope Repeater |
 |
 Single Channel RS 485 PROFIBUS SCOPE repeater module with integrated quality-oscilloscope for 12 Mbps with diagnostic LEDs and redundancy features. Bus connection by screw terminals or front DB9 connector.
The incoming PROFIBUS segment and integrated oscilloscope signals are connected to the ProfiTrace OE core in the Type 1B/1C Head Station via the local backplane. Scope images and busmonitor data are then offered from the web server via the Head Station Ethernet port. Requires COMbricks firmware v 1.260 onwards.
|
 |
|
|
Electrical and Mechanical
• 1 PROFIBUS channel
• 31 devices/bus-loads per channel
• 1200 m cable length (depends on baudrate)
• No limit in cascading
• Termination switch
• Removable screw terminals and 1 DB9 connector
Oscilloscope
• Frequency: 192 MS/s
• Resolution: 50 mV
• Differential range: -6.436 to +6.436 v
Protocol
• Transparent for all PROFIBUS protocols
• 9.6 kbps - 12 Mbps (auto detection)
• 2 bits delay time (12 bits in redundant mode)
• No address required
• Bus redundancy (switchable)
Web server
• Oscilloscope images of connected devices (diff.)
• Last, Min, Max live bus signals
• Bar graph of connected devices
• Email on telegram errors and low bus signals
Backplane
• 4 Networks selectable with switches
• 10 Modules (positioned in the first 10 slots only)
• 500 mA current consumption
Others
• Required Head Station firmware: V1.260
• Firmware update during operation
• Operating temperature: 0..60 °C
• Dimensions: 140 x 110 x 25 mm
• Weight: 120 g
|
|
|
More information about COMbricks
Live COMbricks webserver demo
|
Products
| Order code |  Additional info |
| SCOPE Repeater |
101-201210 |
Includes:
- Backplane unit
- Screw terminal connectors
- Grounding clips |
Available NOW from Hi-Port Telecom
for further information or sales, call 023 9255 2855
|
|
